Training models and simulators for endoscopic transsphenoidal surgery: a systematic review Neurosurgical Review 19 September 2023 Volume 46, article number 248, (2023) https://link.springer.com/article/10.1007/s10143-023-02149-3 読みやすい理路整然とした解説 It is well recognized that endoscopic transsphenoidal surgery has a long learning curve [6], which requires integrated and specific training [7]. Though traditional neurosurgical training is still primarily based on experience in the operating room, many complementary methods are now available. The cadaver laboratory has been classically used to acquire basic technical skills and knowledge of detailed surgical anatomy. Still, high maintenance costs and the challenge of simulating pathologies might limit its utility. Thanks to 3D printing technologies, it has become possible to create customized models replicating normal and pathological anatomy [8]. Furthermore, thanks to virtual reality (VR) development, simulators may provide a repeatable experience in a more complex anatomical environment. In addition, the development of augmented reality (AR) simulators might enhance the quality of training.
Three-Dimensional Printing in Neurosurgery: A Review of Current Indications and Applications and a Basic Methodology for Creating a Three-Dimensional Printed Model for the Neurosurgical Practice Cureus. 2022 Dec; 14(12): e33153. Published online 2022 Dec 30. doi: 10.7759/cureus.33153 PMCID: PMC9887931 Donika Vezirska,1 Milko Milev,1 Lili Laleva,1 Vladimir Nakov,1 and Toma Spiriev
Clinical application of 3D Slicer combined with Sina/MosoCam multimodal system in preoperative planning of brain lesions surgery Scientific Reports Published: 10 November 2022 https://www.nature.com/articles/s41598-022-22549-7
Development of 3-dimensional printed simulation surgical training models for endoscopic endonasal and transorbital surgery Won-Jae Lee 1, Yong Hwy Kim 2, Sang-Duk Hong 3, Tae-Hoon Rho 4, Young Hoon Kim 5, Yun-Sik Dho 6, Chang-Ki Hong 5, Doo-Sik Kong 1 Front Oncol . 2022 Aug 5:12:966051. doi: 10.3389/fonc.2022.966051. eCollection 2022. https://www.frontiersin.org/journals/oncology/articles/10.3389/fonc.2022.966051/full Encouragingly, recent advances in three-dimensional (3D) printing technology have allowed diverse simulation models for EES procedures (8–12). Such models have been used in medical education and surgical skill training as precise replications of the complex anatomical structures of the skull base (10, 13). The development of patient-specific models and improvement of cost-effectiveness have allowed these models to be used in preoperative planning and patient counseling (8).
3D-Printed Disease Models for Neurosurgical Planning, Simulation, and TrainingChul-Kee Park (Google Scholar) J Korean Neurosurg Soc. 2022 Jul; 65(4): 489–498. Published online 2022 Jun 28. doi: 10.3340/jkns.2021.0235 PMCID: PMC9271812 レビュー論文 論理的で読みやすい文章 Predicting the location of the lesion in three-dimensional (3D) space before surgery is more important for neurosurgeons than other surgeons because brain lesions have to be approached through a difficult process called craniotomy, and it is almost impossible to search for lesions during surgery by recklessly scouring brain tissue.
Three-Dimensional Printing in Neurosurgery Residency Training: A Systematic Review of the Literature World Neurosurgery Volume 161 , May 2022, Pages 111-122 World Neurosurgery Literature Review https://www.sciencedirect.com/science/article/abs/pii/S1878875021015667
3D printing in neurosurgery education: a review Grace M. Thiong’o, Mark Bernstein & James M. Drake 3D Printing in Medicine volume 7, Article number: 9 (2021) Published: 23 March 2021 The core neurosurgical training sub-specialties are neuro-oncology, pediatric, functional, neurovascular, neuro-trauma, skull base and spine surgery. https://threedmedprint.biomedcentral.com/articles/10.1186/s41205-021-00099-4 The shortcomings of technical skill transfer for these areas of specialization arising from cadaveric training, such as and more recently through on 3D printed surgical simulators. The aims of this manuscript are to review the current global innovations of 3D printing in neurosurgical training, to identify both its global geographic distribution as well as the gaps in technical skill acquisition that 3D printing technology can potentially fill.
Role of Three-dimensional Printing in Neurosurgery: An Institutional Experience Asian J Neurosurg. 2021 Jul-Sep; 16(3): 531–538. Published online 2021 Sep 14. doi: 10.4103/ajns.AJNS_475_20 PMCID: PMC8477846 PMID: 34660365
Application of 3D printed model for planning the endoscopic endonasal transsphenoidal surgery Xing Huang, Ni Fan, Hai-jun Wang, Yan Zhou, Xudong Li & Xiao-Bing Jiang Scientific Reports volume 11, Article number: 5333 (2021) https://www.nature.com/articles/s41598-021-84779-5 This article summarizes the evaluation of the application of 3D printing technique for the preoperative planning of endoscopic endonasal transsphenoidal surgeries performed in our department.
A Practical 3D-Printed Model for Training of Endoscopic and Exoscopic Intracerebral Hematoma Surgery with a Tubular Retractor Junhao Zhu 1 2, Guodao Wen 3, Chao Tang 2, Chunyu Zhong 1, Jin Yang 2, Chiyuan Ma 2 J Neurol Surg A Cent Eur Neurosurg . 2020 Sep;81(5):404-411. doi: 10.1055/s-0039-1697023. Epub 2020 Apr 15. https://www.thieme-connect.de/products/ejournals/abstract/10.1055/s-0039-1697023 要旨無料
Surgical applications of three-dimensional printing: a review of the current literature & how to get started Annals of Translational Medicine Vol 4, No 23 (December 19, 2016) https://atm.amegroups.org/article/view/12912/html
3D printing in neurosurgery: A systematic review Date of Publication 14-Nov-2016 Page views 11,579 https://surgicalneurologyint.com/surgicalint-articles/3d-printing-in-neurosurgery-a-systematic-review/